Permit repeatable hole
depths Collars won't wobble, nick or damage the drill bit Easy to adjust Drill and Tool Stop Collars fasten onto the flutes of drill bits and permit accurate, repeatable hole drilling without damaging the bit. Capable of holding their position better than set-screw types, these one-piece, ...
- Material: Steel
- Bore Size (in.): 1/8|3/16|1/4|5/16|3/8|7/16|1/2
Weight: 3260538
Permit repeatable hole
depths Collars won't wobble, nick or damage the drill bit Easy to adjust Drill and Tool Stop Collars fasten onto the flutes of drill bits and permit accurate, repeatable hole drilling without damaging the bit. Capable of holding their position better than set-screw types, these one-piece, clamp-type ...
- Material: Steel
- Bore Size (in.): 5/8|3/4|7/8|1
Weight: 3260538
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 8-32 x 1/2
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 8-32 x 1/2
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 8-32 x 1/2
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 8-32 x 1/2
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 10-32 x 5/8
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 10-32 x 5/8
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.500
- Material: Steel
- Screw Size: 1/4-28 x 5/8
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.625
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.625
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.625
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.625
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.625
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.625
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.750
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.750
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. They ...
- Total Width (in.): 0.750
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
Fit standard ACME threaded shafts Right and Left Hand versions Can be placed anywhere on shaft Superior holding power over set-screw type collars ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, ...
- Total Width (in.): 0.750
- Material: Steel
- Screw Size: 5/16-24 x 1
- Screw Type: SHCS
Weight: 3260509
